Granule Filling Machines

Breakage often increases at long drops and hard impacts. Shorten transfer paths where the layout allows, reduce feeder vibration while maintaining an even feed, and check whether pieces strike the container rim. Compare the share of intact pieces at your planned output, not only at a slow test speed.

Oil and tackiness can leave buildup on product-contact surfaces; uneven pieces may bridge at narrow openings. After a trial, check where residue gathers or flow stops. Use the largest pieces in your mix when assessing openings, then adjust feeding and contact surfaces for the actual product.

Stop and isolate the machine, empty remaining product, then remove loose residue from the feed path. Clean product-contact parts by the method permitted in the specific machine manual, dry and reassemble them, and check the first fills after restart. Allergen changeovers must follow your plant’s validated cleaning procedure.

Yes, for compatible cans and closures. Nitrogen flushing is a separate stage after dosing and before the pack is sealed; the filler itself does not flush the headspace. Specify the container, lid and headspace target, then verify residual oxygen and seal integrity on finished packs during commissioning.

Possibly, depending on your product, container and output goal. Tell us which steps operators handle now, such as placing and removing containers, feeding product or closing packs, and which you want to automate. Levapack can assess a suitable configuration; confirm the filler's operating mode and specifications before selecting it.

A standalone filler quote covers different equipment than a connected line. Compare the filler, product feed, change parts for each container size, controls, downstream stations, installation and training. A lower machine price may exclude equipment your line needs. Product characteristics, target dose and output determine what belongs in the priced configuration.